Features
Resin Pump
We use an air driven, fast reversal, low pressure piston pump to deliver
resin at a constant rate. It also drives an MEKP pump via a slave arm
with adjustable ratio ranging from 0.5% to 4%. It comes with a flexible
siphon hose assembly to pick up material from a container.
MEKP Pump
We use high grade precision stainless steel for MEKP pump. It comes
full featured complete with a pressure gauge, an automatic pressure
relief valve with return line and a manual valve with return line for
air lock purging. For precise metering and longer pump seal life, the
piston rod is made larger for maximum rigidity coupled with an internal
self-centering mechanism to eliminate eccentric forces due to misalignment.
(read more)
3-Stage Filtration System
Resin is first filtered through a strainer at the pick up hose, then
through an in-line filter and finally through a filter installed just
before the gun. This 3-stage filtration system ensures minimal valve
blockage and reduces downtime.
Hoses
25ft hose is supplied as standard. It consists of Individual hose line
for compressed air, resin and MEKP and solvent. The hoses come complete
with third stage line filter and shut off valves. Longer hose length
is available upon request.
Solvent Flush System
A pressurized solvent flush system consisting of a solvent tank complete
with pressure gauge, valves, regulators, hoses and fittings. A small
dose of pressurized solvent is first delivered to the static mixer followed
by an air purge to completely clean and dry the mixer. This system ensures
minimal use of solvent to achieve optimal cleaning of the mixer in the
gun.
RTM Injection Nozzle
An ergonomically designed RTM injection nozzle model MVA-01. It has
a manual on/off valve with handle for precise open or shut off of resin
and catalyst flow. Resin and catalyst are fully mixed and dispensed
through the static mixer into the mold. The mixer is thoroughly flushed
with solvent followed by air purge via a simple turn on the solvent
valve.
Accessories
a 1 gal bottle for catalyst
a set of air regulator and pressure gauge for incoming air
a set of instruction manuals and parts drawing
a set of tool kit
Options
1. Mounted on baseplate with mast
2. Mounteon portable push cart
3. 12ft Boom
4. Flow control valve to have absolute control over flowrate and pressure
5. Timer to monitor output
6. In-line heater for better flow
Note : Some accessories may vary according to models
|
